The advanced nature of the Leopard 2 tank has left a deep impression in the eyes of everyone, it is larger than its own 59 tank, no, two laps larger, seven pairs of load-bearing wheels, the hull is very long, the internal space is very large, and, because there is a turret basket, so, when the turret rotates, the gunner does not have to spread his feet and rotate with the turret, for the tanker, it is quite comfortable, and there are even sponges and leather inside, which is absolutely enough to enjoy.

However, it can only be an eye-catching pleasure, such a tank, the price is quite high, even if it is their own production cost, it is already close to a million marks, if it is to be exported, the price will be even more expensive, buy five hundred units?

Five cars are estimated to be enough to choke.

On this day, the hearts of the people were heavy, they had already seen the world's first-class advanced tank, but they were destined to miss it.

And at the same time as they visited, in another corner of the city, the MTU company, the Mercedes-Benz heavy truck, finally drove into the workshop.

When the girl jumped out of the car, a middle-aged man below greeted her.

"Mia, you're back, thank you so much, if it weren't for you, we wouldn't know how to get it back." The man said to the girl.

"August, don't waste any more time, what about forklifts? Remove this five-axis CNC machine, let's quickly look at the benefits of this new processing equipment, which we spent a lot of money to buy, and hope that it is as advertised, higher than the processing efficiency of our two three-axis machine tools. Mia said, began to direct the other workers below, opened the car of the heavy truck, unloaded the machine tool wrapped in the wooden box, and transported it to the clean and tidy turbine blade processing workshop.

Mia, a technician in the turbine blade processing workshop of MTU company, although she has only been in MTU for less than two years, has already shown her extraordinary talent in machinery, especially in improving production technology and improving production efficiency, she is definitely a good hand, this girl, it is said that when she was in elementary school, she once dismantled her father's car in her garage.

Tank engine, is changing from mechanical supercharging to turbocharging, in the past, they used two ordinary three-axis linkage CNC machine tools in the workshop to process, and did not feel that there was anything wrong, but Mia was very dissatisfied, at this time, advanced German machine tool enterprises, has developed a five-axis linkage CNC machine tool, processing special shape of products, such as turbine blades, propellers and the like, with innate advantages! The processing efficiency will be greatly improved.

Therefore, at Mia's suggestion, they purchased a five-axis linkage CNC machine tool, however, the transportation problem of the machine tool has not been solved for a long time.

The packing box is opened, this kind of CNC machine tool is a whole, put it in the processing workshop, it looks, the size is about the same as the three-axis CNC machine tool, and the accessory equipment on the side is also dense.

Unpacking and turning on the power, Mia, who was impatient, had already said to August again: "Computer, connect the computer to it!" ”

Auguste was originally the head of the turbine shop, but since Mia arrived, his identity seems to have changed, and he has become Mia's follower.

For example, now, after Mia finished speaking, August walked to the side of the computer, connected the serial data cable to the CNC machine, and then started the CAM software on the computer.

Before the arrival of this machine tool, Mia has already begun to simulate on the computer, and this set of software is also bought at a great price, which is completely matched with the five-axis linkage CNC machine tool.

After more than an hour of tossing, finally, the machine started.

Mia stared at the processing space inside the plexiglass, the workpiece rotating back and forth on the rotary table, the tool moving left and right, and finally a smile appeared on her face.

"Hey, August, do you see? Its processing efficiency is so high, compared with the three-axis machine tool, look at the A-axis rotation inside, which avoids our previous cumbersome cutting, and it is formed all at once! Look again, the C-axis is also spinning! ”

August stared at the girl's face, at this time, the focused look was so cute, and there was a trace of throbbing in his heart.

"Mia, to celebrate the work of this machine, how about we have a drink after work today?" August said to Mia.

I don't know how many invitations have been made, beer is their favorite in Germany, and Mia is old enough to drink.

Facing the invitation of the man next to her, Mia shook her head as before: "I'm going to study it, see if it's processed, and if there is room for improvement, she looked at the clock hanging on the wall, at this time, it's time to get off work." ”

In Germany, there are very few people who work overtime, work is work, life is life, and no company dares to ask employees to work overtime, however, individuals have hobbies, then it is an exception.

This Mia, there is only machinery in her eyes, although she looks so beautiful, those eyes are very godly, and her lips are even more sexy and heartwarming when viewed from the side, but she never seems to have a good impression of any man, is it that she doesn't like men at all, only machines?

"Okay, then I'll accompany you to study the machine tool." August said helplessly, I just hope that after being together for a long time, this girl can feel for herself.

……

"It's a pity that we didn't even have a chance to drive today, so we just went up and had a look." After dinner, Wang Erzhu still felt a little disappointed, but they were ready, just waiting to get on the Leopard 2 drag racing, who would have thought, just go up and have a look.

It's not cool at all, think about the high spirits when driving the challenger, now, there is no chance!

At this time, in the hotel room, open the window to see the Isar River flowing slowly, on the other side of the river, the street lights are lit, and the spire buildings are reflected in the night lights, full of exotic atmosphere.

"If we can't afford it, people won't let us burn more oil, or maybe it's deliberately pressing on us." Qin Zhenhua said: "However, when we come to Germany, if we really want to spend money, the most important thing to buy is CNC machine tools." ”

Hearing Qin Zhenhua say this, Wang Erzhu also immediately nodded and said: "That's right, especially the advanced five-axis linkage CNC machine tool, if we can introduce one, the processing accuracy, I don't know how many times it can be improved!" ”

Wang Erzhu's article at that time was the introduction of processing equipment, and he was quite looking forward to this kind of CNC machine tool.

Five-axis linkage? Looking at Wang Erzhu, Qin Zhenhua shook his head helplessly: "We have money, and people won't sell it, it belongs to strategic materials, and it would be good if it could be sold to us with three-axis linkage." ”