As the silvery liquid gradually filled the entire storage residue, I first put the dragon claws and the carved keel into the mold, then clamped them tightly, and carefully poured the ore melt into the groove at one end. After the melt was completely in the mold, I picked up the claws and shook them gently a few times so that the melt could fill every void in the bones and form a semi-condensed state, and then poured coolant.

Boom, the cold frost steamed quickly on the keel, rising into bursts of white mist, and my heart suddenly rose to my throat, if it broke when it was fused and connected, it would not have to be changed. The mist gradually dissipated, and when I saw the dragon claws and bones that were tightly connected, my heart was put down, and now that the rough sample was completed, I had to move on to the next step of fine processing.

The front end of the golden-red bone handle is carved to resemble a dragon's head, and the open dragon's mouth bites the end of the dragon's claws slightly, and two arc-shaped dragon horns are concave in the bones, which are hollowed out to connect the dragon's tendons.

And the excess ore melted night actually spread along the hollow bone crack in the dragon's claw, filling its inside, the cold metallic luster loomed on the surface, and the whole dragon's claw seemed to be bathed in the flames of hell, very beneficial, which was completely unexpected to me.

He took the forged dragon claw in his hand and waved it a few times, it was very easy, and he nodded with satisfaction, and the next thing should be to connect those dragon tendons.

I took a tendon out of my bag, and after smoothing it, I tied it into one of the rings of the dragon's horns, circled it twice, and tied a concentric knot. I tried the toughness, and it was good.

However, should we make it stronger, this dragon tendon, we always feel a little unsafe when we look at it, and my eyes swept over the steel claws that were placed on the side, and I noticed. The cable chain on it is clearly carefully forged. It is interlocking and easy to break.

Yes, I might as well tie another dragon tendon, the two dragon tendons together, it should not break no matter what. In the same way, I tied another tendon to the dragon horn ring as well. Then weave the two dragon tendons into a thick one. In this way, the dragon rope does become stronger, well, just do it. I took out all the dragon tendons I got from the Sky Formation, and braided it, but the longer the rope, the better.

Finally used up all the dragon tendons in my hand, I looked up and looked, uh...... I patronized the editor, but I didn't pay attention to it, and now it's like this...... How can there be such a long rope to fly claws? I saw that the whole rope was forty or fifty meters long. Forget it, it's already very troublesome to make it up, so it's hard for me to solve it again, so let's use it longer. Don't lose ground.

the dragon tendon rope and danced, bringing the dragon claw up, well, yes, the feel is full of elasticity, not at all like the flying claw used before, once the distance is far away, it feels stiff. The woven dragon tendons are like rubber bands, and after the dragon claws are thrown, if they don't catch something, they will immediately bounce back instead of falling on the spot.

Putting the dragon claws aside, I picked up two more keels, why, we have to add a ring buckle to the tail of the dragon tendon. After a period of grinding and forging, the two golden hook-shaped rings were also shaped, and I was connected to the tail end of the dragon tendon rope, which is shaped like a curved dragon tail, which can be held in the hand or hung on the waist, so that even if we use the flying claw to hang ourselves in the air, we can also attack with both hands empty, hehe, I seem to have seen the infinite use of this dragon bone flying claw.

"You've made a new flying claw, please name it." Listening to a crisp prompt sound from the system, my heart blossomed, our character is good, the success rate is really high, what is it called, well, I thought for a moment, let's not get too complicated, just call the flying dragon to explore the cloud claw.

However, it stands to reason that equipment made of such a superb material should be a superb product, but this Flying Dragon Cloud Exploration Claw has nothing special, at most it only has a few more attacks than ordinary flying claws, which inevitably disappoints me, could it be that something went wrong when it was forged.

After a lot of confusion, I learned to give up, and now this bouncy Wyvern Cloud Claw should be able to help me a lot. Just as I was about to put it away, a tall and thin apprentice came up to me and said, "Master Yin, why is it so rare to see you inlay gems into your weapons?" Is it because you can't find the right gemstone, or is it too taboo for its low success rate? ”

"Gemstones, yes!" I slapped my thigh suddenly, we hadn't thought of it before, didn't there be a talk of inlaid gems. We've only used gems in the past to forge wands for ponytails, and that's because wands themselves need to use gems of various attributes to gather mana, and I didn't even realize this when crafting other weapons. In fact, the reason why monsters drop weapons or equipment with special bead attributes is mostly because they are more or less inlaid with gems of various attributes. In this way, shouldn't we also get two gems to inlay its face, I thought to myself.

Turning my backpack upside down, I found a few gems that could be used for inlays, and I was about to set them on the claws of the dragon, but when it was time to do it, I stopped abruptly.

When I first made a wand for ponytails, I had planned the location of the gems from the beginning, so it was a one-time success, but now if I had to add gems to a weapon that was already a finished product, would the result be the same, and if I used a stone, if it failed, it would be nothing.

Well, to be on the safe side, I decided to try out a near-miss weapon first. Which one to take, I don't have any other extra weapons and equipment to try, after thinking about it, my eyes fell on the full moon scimitar, this knife has also been with me for a long time, and it is time to improve its quality.

Although it is feasible to set the gem on the body of the knife, it is estimated that the difficulty is not small, and when I take out the scimitar, I look closely, and it seems that I can only make a fuss about the hilt, but how can I add it intact.

I turned back to the tall and thin blacksmith apprentice and asked casually, "Have you ever set gems with equipment?" ”

He nodded and said, "Of course there is, Boss Qian often brings equipment over to add gems." ”

"Oh," I was immediately overjoyed when I heard this, and hurriedly asked, "Then what do you usually do?" ”

The blacksmith apprentice looked at me with some dissatisfaction, as if wondering how our "master" blacksmith could ask such a low-level question, but he still replied respectfully: "We all choose the setting first, then punch the holes, then add the ore melt, and finally put the gems in to cool, and that's it." ”

Oh, I see, so "easy"...... As soon as I let go of the apprentice, I immediately thought about it. After thinking for a moment, I picked up the full moon scimitar, put it on the furnace and heated it for a while, then put it on the anvil, lifted the diamond chisel in the middle of the handle, and chiseled out a small hole, the size of which was slightly larger than the gem I chose, and then melted a piece of chicken blood ore and Cabernet Dragon concentrate, scooped a spoonful of mixed solution, poured it into the small hole, and when it cooled for a while, and the mineral liquid was viscous, I immediately picked up a set ruby and stuffed it.

The extra attribute of this ruby is to increase the fire attribute attack in the attack, if it succeeds, will it give us a flame knife, just when I was full of reverie, I only heard a crisp sound like glass breaking, the ruby cracked in the hole, and the handle of the full moon scimitar was also broken into two together in this accident.

Why, how could this be, I picked up the full moon scimitar with a broken handle and was considered a scrapped with a dejected face, and thought depressedly in my heart: How can this scimitar be so fragile, it was actually broken like this.

"Fuck, it looks like I'm not suitable for playing with mosaics, and I'll hit a ghost when I open the door." I tossed the hilt of my knife aside, annoyed.

"Young man, don't experience wind and rain, how can you see a rainbow, do anything, don't give up criticism lightly." A deep voice came from outside the door, déjà vu, I looked up at the door: the silver, halberd-long, steel-like body, the flames in the furnace outlined a golden-red shadow around his body, isn't this Master Gongxinzi, how could he appear here.

Later, I learned that as the top NPC craftsman in each auxiliary profession, he would go around his field every month and give some guidance, so as to cultivate better industry talents. In particular, workshops that produce high-end items have a certain chance of welcoming npnetpc workers to get upskilled. And after I made the Smart Sword and the Blue Feather Battle Bow in this place, it can be regarded as fighting for the NPC blacksmith here, so the old man rushed here when he heard the news. Originally, the time when he came was not fixed, but I didn't expect to be met by me, and it was really fate, I was lucky.

"Old man Gong? You...... How did you get here? I quickly stood up and hid the remnants of the full moon scimitar behind my back. Show the master our failures, and don't give him a joke to death.

The old man smiled heartily, bent down to pick up a piece of ruby from the ground, took it in his hand and rubbed it carefully, and said in a loud voice: "I heard that a few good weapons were produced in a private workshop in Thunder Emperor City during the inspection of the trade union, and I happened to come to Thunder Emperor City this time, so I came to take a look." As he spoke, he spun around again. When the NPC blacksmiths saw the real masters in this small shop, they hurriedly served tea and handed water, their faces full of extreme admiration, and for a while, the whole shop was busy.

Tips: The new domain name "biquge.info" has been launched by Biquge, and the original domain name is about to be discontinued. Please tell each other, thank you!