In the case that Zhuang was not far away from the water and sent the real old fish belly team of Xucheng Tunnel Construction to play, Niushan Town Wood Factory finally got this precious sugar maple.

They knew that they were already far behind, and after getting the wood cube, they didn't dare to delay for a minute, and immediately gathered all the people and began to study the fast wood.

Because the time was very tight, it was too late to dry and then process, so Director Hu planned to take two steps, first breaking the huge square wood and cutting it into two squares.

Take one piece to dry, start processing one piece now, try various processing methods, and then try to dry after processing.

And this kind of more precious wood, naturally can not be cut casually, some precious wood, even more expensive than gold, in the production process of a little more loss, can make people die of pain.

Director Hu didn't dare to hold it up, he personally went into battle, measured the size of the wood, and then drew a cutting line, and then they cleaned up the band saw, replaced it with an imported ultra-fine and ultra-thin saw, and let the best master in the factory personally go out and start to break the material.

The band saw rotated at high speed, even some traditional hardwoods, to this band saw, it was as fragile as foam, the master set up the guide rails, rulers and limiters, and firmly grasped the wood square with both hands, and steadily approached the wood square.

As soon as the band saw came into contact with the wooden square, a "squeak" sound was heard.

"Oops, that's not right!" The master subconsciously dragged back, dragged the wooden square back, then closed the band saw, and then leaned over to the saw blade to take a look, and suddenly broke out in a cold sweat: "Fortunately, it was closed early!" ”

"What's going on?" Director Hu also stepped forward and saw that the originally fine sawtooth was missing teeth, thousands of yuan a piece, and the imported saw blade, which was claimed to be able to see even steel, was almost smoothed.

"What's going on? Did we get the wrong saw blade? ”

"You can't go wrong, it's the imported saw blade we bought last time, that's right." The master turned his head to look at the wooden square again, and saw that a white line had been cut out of the wooden square, and the white line was embedded with small teeth.

"It's not smoothed, it's ...... Got stuck! ”

What kind of wood can break such ultra-hard serrations?

How tough is the fiber of this thing?

"We ...... Looking in a different direction? The master wiped a handful of cold sweat and said, "This time, let's try it along the wood grain?" ”

Just now, I was going to cut this wood horizontally, and it was cut vertically, but I didn't expect the wood grain of the wood to be so strong.

"This may be a lot of loss......

"It's better than not being able to cut it, and if you can cut it into a plate, you can use a laser cutter." Master Fu Dao.

Director Hu thought about it and nodded.

Now he didn't care about getting the most out of the material, so he turned the wood sideways, replaced it with a band saw, and started the machine again.

"Squeak!" The sound was much louder than before.

"That's right." The master pushed forward with both hands steadily, but the more he pushed forward, the more wrong the sound became, from the beginning of the squeak, to the sound of humming.

Two centimeters later, the saw blade was caught in the wood!

"Squirt!"

"The water is spraying......"

"What's going on? How can it be clamped? ”

Finally removed the wood from the band saw, the band saw was already charred, it was friction carbonized wood, and the master was at a loss.

The vertical wood grain will be stuck and broken, and the wood grain will be clamped, what can I do?

Director Hu leaned forward and suddenly wondered, "Hey, where is the white line just now?" ”

Just now, when the vertical wood grain was cut, the band saw once cut a white line on the wood.

By this time, the white line had faded to the point where it was almost invisible.

The master reached out and touched the position of the white line in disbelief, only touching a few broken teeth that were stuck in the band saw before, and small triangular teeth stuck to the fingertips.

The white line was completely invisible.

"This ...... How can it be? Master Fu and Director Hu glanced at each other, and hurriedly looked at the saw mark that had just been cut into a centimeter deep along the wood grain.

They saw that the saw mark was recovering at a speed visible to the naked eye, and the silver light seemed to become extraordinarily bright at this time, showing a silver line at the saw mark.

When the saw marks were fully restored, the silver light dispersed, and the wood was back to its original appearance.

Flat, smooth, boxy, and beautifully textured.

But the hairs of the master and the director Hu felt that they were about to stand up.

"This ...... This wood is probably not still alive. Master Fu said.

"Even if it's ...... Even a living tree can't grow so fast! "Director Hu said in his heart that he has seen in his life, not 10,000 but 8,000, but he has never seen a piece of wood so exaggerated!

What the hell is this thing?

Isn't this just a piece of wood? How can it still heal on its own?

Could it be that this is actually Cybertron's cube?

Or some amazing alien creature?

No, it can't be.

However, how can this kind of wood that cannot be cut and will heal on its own can be processed into flooring?

"This can't be used to play with us!" Director Hu almost smashed the table.

"No, no...... Other companies, there will always be a way, go and inquire about how other companies process this wood. Director Hu said.

Although it is only a small factory, after all, it has been immersed in the wood processing industry for so many years, and some contacts are still there.

Soon they were in contact with several companies that had also received orders.

Hearing that Director Hu inquired about the timber, several companies were sloppy at first: "This is a trade secret, Lao Hu, if I tell you, it will be a mistake." ”

"Don't come to those empty things, can't you cut the wood?"

As soon as he said this, the other party couldn't hold back, and immediately complained: "The saw blades we imported are scrapped seven or eight, the motors are about to burn, and all kinds of methods are changed, so I sent myself and the factory director to pull the big saw, how can I not cut this wood, you say that the wood that can't be cut, how to process it?" ”

Another manufacturer said: "Our boss has a familiar metal processing factory, he plans to take this wood square to the metal processing factory to try the metal cutting machine, we are waiting for news." ”

After a while, he added: "Lao Chen of the metal processing factory almost beat our boss out, saying that our wooden square broke their knife heads......"

Metal cutting is mostly done by milling, and the high-speed rotating bits are almost cocooned by the flexible wood fibers.

It's not just Director Hu who inquires about the news, other people are helpless about this piece of wood, and they are all inquiring about each other.

"That's right...... How did you cut this wood like this in the first place? Director Hu suddenly said, this wood can't look like this from the beginning!

Director Hu thought for a long time, but still dialed Deng Yali's phone.