Section 168 Heat melting
The Pamiji Plateau, located in the southwest of the Eternal Night Kingdom, is a bilateral area of communication with the Kingdom of Guman. Pen ~ fun ~ pavilion www.biquge.info because the average altitude is more than 3,500 meters, there are few people in ordinary times. With the exception of a few native primitive tribes, the Pamiji Plateau is the undisputed off-limits area for humans.
But on this day, in the blue sky like drifting, a huge black shadow glittered with crystal brilliance.
It was a strange thing, not living or dead. Its overall structure is a flat and large transparent crystal. There are white threads inside the crystal, which looks like ice...... No, it should be said that it is ice.
Because when a plateau eagle flew past it from a hundred meters away, it was directly frozen into an ice sculpture and fell down.
If it's ice, it's dead. But why is it misunderstood as a living creature? This huge piece of ice, about 20 meters long, has the same transparent wide wings on both sides, and the shape of the wings is similar to that of a swan. Every time I flapped my wings, there were crystal ice feathers falling one after another.
The sun on the plateau was fierce, shining brightly on the winged ice.
Above the ice, several mysterious people in white robes were resting with their eyes closed. The endless freezing power of the ice did not seem to cause them harm, but in the white mist, their figures became more and more ethereal.
If you look closely, you will find that behind the white-robed man, there is a crescent moon that has been sealed and frozen.
......
On the first day of the second month of the flowering month, Ingres experienced half a month of malaise, and on this day, the consequences of the magic backlash were finally lifted.
Almost immediately, he threw himself into the practice of his spells.
He was the first to learn the basic techniques of gold and stone, the method of heat melting and condensation. In his plan, he had two prerequisites to reach the top of the Sky Tower, one was an alchemical weapon, and the other was a set of defensive spells.
Of these two prerequisites, it shouldn't be a problem to learn the set, but it just takes a while to become proficient. But the production of alchemy weapons, Ingres is a little uncertain, after all, it is the product of the combination of two civilizations, and the future is uncertain.
The most important thing is that Angel doesn't know at all if he can cross the threshold of the alchemy world. If you can't even become an alchemy apprentice, then all other plans are utopian.
Therefore, Angels put all his attention on the hot melting method at the first time.
The hot melting method is the first threshold for alchemy apprentices.
The essence of the hot melting method is actually the long-term endurance between the fire element and the magic power, which produces extremely high heat. Then use the trick model to control the range of the high heat and not let it hurt you.
This kind of trick is just the opposite of the trick of the three major architectures, and the trick model is not to construct the hot melting method, but to limit the high temperature of the hot melting method.
Angels took out a piece of paper, and the paper was densely written, full of data and formulas. This is the result of the model he deduced for the hot melting method when he was fighting back a few days ago.
After memorizing a few key coordinate points of the model diagram, Angels closed his eyes and went into a meditative state.
The space of mind has returned to clarity, and the "lollipop" he built is alone in the chaos, and the singularity is slowly turning, refining the primordial magic.
Ingres didn't care about the singularity, but released the pure magic power from the magic source to build a trick model of the heat melting method.
There is the positioning of the Vientiane axis, and in almost two or three seconds, the juggling model is built.
After the trick model of the hot fusion method was constructed, there was nothing abnormal, it was just suspended in the thinking space, there was no collapse or disintegration, and there was no impulse to release it to the outside world.
Ingres turned the trick model to his fingertips, still without feeling anything, without any trace of transcendence.
"This model is really different, it never collapses even if it hangs outside the body for a long time, and it is as solid as a boulder. Angel said secretly.
Since the model didn't see a problem, Angels simply set about "warming up".
The combination of the fire element and magic power, simply explained, is to release the magic power from the body and rub it against the fire element in the outside world.
This step seems to be easy, and the magic power exported outside his body is minimal, but the patience and control he needs is difficult for ordinary wizard apprentices to do.
The so-called patience is to continuously output magic and slowly warm up. The time required for this process is determined by the amount of fire in the air. In places where the fire element is active, the warm-up time is about a few minutes, but in places where the fire element is lazy, the warm-up may even take a few hours, maybe more.
Basically, patience is a step that can't stop a wizard apprentice.
But the next step of control is the hardest part of learning the hot melting method, and it is one of the reasons why alchemy keeps most wizard apprentices away.
During the warm-up process, the mana must be continuously exported from the body to the outside of the body, although the mana consumption is very small, but it must be continuously released with the same amount of mana.
A little more, a little less, even the slightest hint of it, will lead to a failed warm-up.
With precise control measurements, it is almost impossible for an apprentice wizard to do this.
......
Angel also began to warm up, and the magic power continued to output from the body to the outside of the body, and when he first came into contact with the fire element, it was very easy to endure it.
But after 2 seconds, the warm-up failed. The reason, like other wizard apprentices, is that the measurement of mana is not controlled with precision.
In the second attempt, Ingres carefully released the magic power little by little, and this time he continued to ...... 3 seconds.
Ingres went on a third and fourth ...... In the tenth test, the highest record was to maintain magic power for 4 seconds. Everything else is basically hovering for 2 seconds.
In places where the fire element is active, this warm-up takes more than two minutes. But he can't even break through 5 seconds now.
Ingres was suddenly a little depressed, didn't he have the talent to learn alchemy?
The mana was almost consumed at this time, and Ingres's mood was also poor, so he simply closed his eyes and regained his magic power through meditation.
In a blink of an eye, five hours passed.
In the process of meditation, Ingres's mood gradually calmed down.
He also figured out that it was normal to be hit, and nothing could be done overnight. He will continue to try, and if there is really no way to restrain the measurement of magic power, then it can only be said that he has nothing to do with alchemy.
At this time, the magic power in the magic source reached the fullness again, and Angel took out the dry food, and while he was hungry, he thought about how to control the measurement of the magic power.
Control metrics are definitely not something that can be done with care, and Ingres, who had previously focused almost all of his attention on control, struggled to achieve perfect control.
Ingres pondered: Manpower is always exhausted, can it be used to borrow external forces?
When it comes to external forces, the easiest way to control the measurement is through the pipe limit. It's like drinking water through a straw, which is an effective way to limit the outflow of water.
But there's no way he's going to put a tube in his mindspace. Besides, can magic fit into a tube?
Pipeline...... Limit......
Ingres muttered repeatedly, images flickering in his mind. Suddenly, a picture full of dotted lines flashed through my mind.
"I thought about it! I can't plug in a pipe, but I can make a pipe myself!" Ingre's face flashed with excitement: "You can do it with a Vimmane axis!"
The Vientiane axis is the manifestation of the 36-digit spatial coordinate system positioning method.
The Vientiane axis spatially transforms the mind into a collection of countless dotted lines, and each point can be transformed into a spatial coordinate point through the Vientiane axis. Angels only needs to construct a three-dimensional channel in the thinking space, using the Vientiane axis as the measurement standard, and the measurement of magic output can not be controlled!
Thinking of this, Angel immediately began to experiment excitedly.
It took half a day for a passage determined by the Vientiane Axis to connect outwards from the Demon Source.
Ingres took a deep breath and began to draw mana from the demon source, carefully watching not to let the measurement of mana overflow outside the Vientiane Axis passage.
2 seconds, 3 seconds,...... 19 seconds, 20 seconds.
After 20 seconds, the warm-up failed again.
This time, though, Ingres didn't look frustrated, because he was pretty sure he had solved the measurement problem! From 4 seconds to 20 seconds is proof!
The reason why he failed this time was not that the measurement was not well controlled, but that the rate fluctuated.
As long as the measurement problem is solved, all other problems are minor.
It took another while, and with his constant attention to the speed issue, he was able to reach a basic balance.
With both the metrics and rates solved, Angels turned on the warm-up again.
2 seconds, 3 seconds,...... 19 seconds, 20 seconds...... 1 min 10 sec...... 1 min 30 sec......
At 2 minutes, Angel failed again.
However, this failure has nothing to do with technology, but ...... His fingers were burned.
He has been focusing on solving the problem of warm-up, but he has forgotten one thing, the position of the warm-up must be within the trick model, otherwise, it is only a matter of time before he is burned.
......
The third day of the month of the flowering month.
Angel moved the stove in the kitchen to the basement.
Light the fire.
The scorching heat slowly spread in the basement.
Ingres sat on the edge of the fire, closed his eyes and began to meditate, and after about half an hour, Ingres stretched out his spiritual tentacles, feeling the activity of the fire element in the air.
ββWith the furnace as the center, the activity of the fire element is several times higher than before.
Ingres felt that it was almost there, and stood up and walked to the pile of wooden boxes on the other side of the basement, which contained non-advanced materials purchased from the Promi Alchemy.
From the wooden box, Angels took out a black and reddish piece of metal.
This was the Earth Demon Blood Copper, the one he had purchased the most. It is the lowest level of the blood copper series, and it is a copper mine that has been contaminated with the blood of the earth demon and has been cultivated for many years.
Items crafted from Earth Demon Blood Copper will greatly increase their hardness and wear resistance, and have a very small chance of obtaining special effects.
Angel took out the Earth Demon Blood Copper and returned to the fire.
Angel used the heat melting method to build a trick model, and then output the magic power to slowly merge with the fire element, and time passed bit by bit.
Fifteen minutes later, the hot melt method is formed!
Angel could feel the intense heat in the model at his fingertips. But I'm bound by the model.,There's no sign of leakage.γ
Angel put the Earth Demon Blood Copper in the Heat Melting Method.
As time passed, the Earth Demon Blood Copper slowly showed signs of melting within the Hot Melting Method......